11/06/15 14:11

(Click on the image)
So we’re back with
Steven Harpst Bronzes And Fine Arts, generating another bronze glove for the Nevada Boxing Hall Of Fame. We are going to re-scale the glove and 3D-print it for a 20-piece run in bronze.
Check back on the
Project’s page to see the steps we are taking to generate the glove!
Cheers!
17/02/15 17:45

(Click on the image!)
We just finished the sculpt for a Bas Relief that will be installed in the lobby of ABCMouse.com in Glendale, California…
We will post more pictures as we get them ready. We will go over the 14”-wide “Proof-Of-Concept” we printed using our Lulzbot Taz 4 3D-Printer and how we put the whole thing together (fabrication) and how the final 30”-wide bas relief came out, so stay tuned!
Cheers!
26/12/14 11:54
We just finished three
8”- tall maquette for a five-foot statue of the mascot for
ABC Mouse. This is one of the best ideas I can recommend to anyone who wants to make such commitment: make a small maquette and see if you like the pose. Is the head too big? Does the tail coil the right-way? These are questions you can answer with a small maquette rather than committing to the final 3D Print or milled-sculpture!

(Click on image for link)
Cheers!
02/06/14 20:36

(Click on the Image!)
I just uploaded a diary of one of my favorite Projects we did this year, the “Bronze Boxing Glove” for
Steven Harpst. We scanned an original Bronze-glove he had sculpted and
shrunk it to various sizes (
10%, 15% and 25%) per his costumer’s request…

This was done for the
Nevada Boxing Hall Of Fame, check it out!
Check back on the
Project’s page to see the steps we are taking to generate the glove!
Cheers!
22/11/13 08:37

(Click on the Image!)
In the coming weeks I’m going to write a quick diary of the process and techniques I used to bring to live a toy design for a good friend of mine,
Jon Kinyon (
www.jonkinyon.com.)His Project, “
OddJobs” (
www.jonkco.com) is a T.V. series he is developing based on a line of toys he is making - synergy people, SYNERGY!...
What I did for Jon was to take some concept designs he had of the character and I sculpted a 3D model in ZBrush. I then converted the ZTool (model) into a Stereolithography file (.STL) and off it went to be printed at
Purple Porcupine in Irvine California. The results are amazing, so stay tuned for designs, turntables and pictures of the whole process!...
Cheers!
27/07/13 08:51
No, I didn’t make this commercial, but I modeled the goggles!

(Click on the image!)
Click on the banner bellow to see a
step-by-step diary on how I model the goggles!

(Click on the image!)
Cheers!